Aug 02, 2019 by Bill

Q: What kind of a window does the shipper give as to delivery time? I can have a couple of guys help me unload the kegerator from the truck and take it inside. However, I can't have them sitting around all day waiting for the truck.

A: It depends, the Kegerator once removed from the pallet weighs 92 pounds in its box. If you have a hand truck, it is easy to move with one person once it is unstrapped from the pallet and eased off the truck. Generally, delivery windows are about 4 hours wide.

Jul 11, 2019 by steve

Q: as shown on the instructional video gas and liquid were connected with duotite connectors. are these connectors included with the purchase.

A: No, Duotight splitters are included, but the shanks in the tower have hose barbs that need to have tubing pressed over the barbs.

Jul 09, 2019 by Brent

Q: My kegerator is forming a lot of ice on the inside back wall. Do you have any suggestions as how to keep this from happening?

A: It sounds like you might be a humid climate. Every time you open the door, humid air enters which turns into frost on the back cooling panel. The solution is to turn the unit off for 24 hours once in a while and let the ice melt and the inside dry out before turning on again.

Jun 08, 2019 by Steve

Q: The tower has excessive sweating at times, it's located in my basement. other than not running the fan is there any other options? I never has an issues with condensation on my old kegerator. Thanks

A: You could try insulating the tower better with another layer of insulation, such as the bubble wrap silver stuff sold at Home Depot. Other than that, leaving the fan off is best if you do not plan to pour beer for a while.

Mar 01, 2019 by Dan

Q: What is the power draw on this kegerator - such as when the compressor first kicks on to cool the fridge down (usually the max power draw) as well as normal operation. I would like to put one in a room that shares outlets and dont want to trip the breaker

A: As with most high draw appliances the kegerator should be on a dedicated 15 amp circuit as the draw upon startup can be between 6-8 amps.

Ask a Question